There were no fire alarm, fire detection or automatic sprinkler systems installed
in any of the buildings on the site. However, an on-site fire pump had been installed to
supply hose reels in the manufacturing building.
The hydrant located at the intersection of Southwest 20th Street and Southwest
15th Avenue had a statis pressure of 72 psi and a residual pressure of 65 psi at a flow of
1300 gpm. This hydrant is supplied through approximately 150 feet of 12-inch under -
ground pipe, which is connected to a 20-inch city water main located under Southwest
15th Avenue. This 20-inch city water main also supplied a 6-inch loop to the west,
which ties back into the 20-inch water main to the south.
Next » Inspections and Code Compliance